cost guide

Posted on July 31, 2026July 31, 2026 by Laura Kay — Leave a comment

Ground Mounted or Wall Mounted? Choosing the Right Flagpole for Your Building

Most people arrive at this decision the same way. They know they want a flag flying, they look at the building, and they realise there are two obvious options and no obvious answer.

The short version: if you have the ground space, mount in the ground. It gives you height, presence and the widest choice of pole. If you do not, or if the flag needs to be seen from a particular direction, wall mounting solves the problem neatly. Roof mounting is a specialist job in a category of its own.

Here is how we would help you decide.

Ground mounted

The default when you have the space

A ground mounted pole is a freestanding structure set into its own foundation. It is the arrangement most people picture when they think of a flagpole, and there are good reasons it remains the standard.

You get height.
Our glassfibre range runs from 6m to 12m as standard, and taller on request. Wall mounted poles reach a genuine height too, up to 8m from stock and taller on request, but a ground mounted pole will always give you more, and height is what makes a flag visible from the road, the car park or the approach.

Wigton – 4 x 10m Ground Mounted FlagPoles

You get the best pole.
Ground mounting gives you glassfibre at full height. Single-piece construction, no joints or visible seams, a UV-resistant marine-grade gel coat that holds its gloss for years, and wind resistance up to 100mph without a flag flying. There is no powder coating to chip and no metal to corrode.

You get easier servicing.
A ground mounted pole with a hinged baseplate can be lowered to the ground for inspection and maintenance, making every future service quicker, safer and cheaper than working at height. Some of our wall mounted poles offer hinged brackets too, but at height the benefit is smaller, since the pole still has to be reached before it can be lowered.

You get a proper focal point.
A pole standing on its own in front of a building reads as deliberate. It anchors an entrance in a way a bracket on a wall does not.

The trade-off is access rather than cost. A ground mounted pole needs vehicle access to the position, so if your building sits directly on the pavement, or your frontage leaves no room to work, it may not be practical. But where there is space, ground mounting is usually the cheaper option. A soft ground installation in particular tends to come in significantly below any wall mounted alternative, and even a hard ground install is normally cheaper, because wall mounted poles have to be chemically fixed into the structure, which is more involved than it looks.

Wall Mounted Flagpoles

Wall mounted

When ground space is the constraint

Wall mounting puts the pole on a bracket fixed to the building itself. It is the right answer more often than people expect, particularly in town centres and anywhere the ground in front of the building is not yours to dig. On listed or historic buildings either method can need consent, and fixing into the structure brings its own considerations, which is one of several reasons those projects are worth talking through with us rather than ordering off the shelf.

We offer three ranges, and we would point most people towards the first.

The Glassfibre wall mounted flagpole is the one we recommend. It brings the same qualities that make our ground mounted glassfibre poles so popular to a wall fixing: single-piece construction with no joints or seams, a UV-resistant marine-grade gel coat with a high-gloss finish, and a pole that is strong, maintenance free and built to last. It comes complete with a zinc-plated steel bracket, halyard and gold finial, in white as standard with other colour finishes on request, and in heights up to 8m. If you want a wall mounted flag that looks the part and needs minimal maintenance, this is it. Prices start from £346.50.

The Heavy-Duty Aluminium wall mounted flagpole is a solid alternative for larger flags and more demanding positions. Available in various lengths, with 4m and 5m poles in one section and 6m and above in two, and a sectional installation service if you would rather we fitted it.

The Short White Aluminium wall mounted flagpole is our most affordable option. A 50mm diameter aluminium pole in white, supplied complete with a white powder-coated steel bracket, halyard and dome top, in a choice of lengths, with alternative colours on request.

All three come with a choice of vertical or 45 degree bracket, and the angle matters more than it sounds.

A 45 degree bracket lets the flag hang and fly outward from the building. It is the traditional look, it works well above entrances, and it keeps the flag clear of the wall.

A vertical bracket holds the pole flat against the building for a cleaner, more contemporary line. It suits narrow frontages and situations where projecting over a pavement is not permitted.

If you need greater projection from the wall than a standard bracket allows, or the position is particularly exposed, we can fabricate a bespoke bracket engineered specifically for that installation.

Why we do not supply the fixings

This is worth explaining, because it surprises people.

Our wall mounted kits include the pole, the bracket, the halyard and the dome top, but no screws or fixings. That is deliberate. The substrate a bracket is fixed into changes everything about how it should be fixed, and brick, block, stone, render over insulation, concrete, steel frame and timber all demand different specialist fixings.

A bracket is holding a lever. The wind load on a flag several metres up is transferred through the pole into a small number of fixing points, and a fixing chosen for the wrong substrate is the weak link in the whole assembly. We would rather specify the right fixing for your building than put a generic pack in the box and hope.

If you are fitting a short pole to sound brickwork at low level, this is a manageable job. Beyond that, please talk to us first. We will tell you what the position needs, and if it needs us, we will say so.

Roof mounted

A different job entirely

Roof mounted flagpoles are their own category, and almost always a bespoke one.

Very few roof installations can use a standard catalogue pole. The mounting has to work with the roof structure, the parapet or whatever it is being fixed to, and the loads have to go somewhere the building can take them. That means the pole and its mounting are usually designed together for the specific site.

The detail worth knowing about is stays.

Old Alresford House – Roof Mounted Flagpoles

A roof mounted pole normally needs staying to handle wind loading. The conventional approach runs external stay wires from the pole down to fixing points on the roof, which works structurally but looks like guy ropes on a marquee. On a heritage building or a civic frontage that is often unacceptable.

Our bespoke roof mounted poles use internal safety wires instead. The staying runs inside the pole rather than outside it, so you get the structural performance without the external wires spoiling the line of the building. From the ground it simply reads as a clean pole.

Access is the other consideration. Roof poles cannot always be reached by a platform, and erecting scaffold for a single installation is usually disproportionate. We serviced the roof mounted flagpoles at the Rec using steeplejack access, laddering directly up the poles where a MEWP could not be positioned. For facade installations at height we use rope access, which we have used at sites including Reading Minster. Between IPAF powered access, steeplejack capability and rope access, we can generally reach a position that other contractors would decline.

In summary

For most customers, the glassfibre pole is the right answer, it offers outstanding performance across the widest range of applications, looks superb and will give years of trouble-free service. If budget is the primary consideration and the location is sheltered and domestic, the NOV aluminium is a capable and good-value starting point. The Standard Aluminium sits between the two and is particularly worth considering if you need something between 5m and 8m without the additional delivery cost of a large glassfibre pole. And for the rare case of truly extreme exposure, the architectural aluminium is there when nothing else will do.

Whatever you decide, our team is here to help, whether that is talking through the options, helping you choose a flag to go with your pole, or arranging professional installation. We have been doing this for a long time and genuinely enjoy helping customers get it right.

Interested in professional installation?

Give us a call on 02392 237130 or drop us an email and we will be happy to discuss your requirements and provide a quote. We install flagpoles across the UK and take care of everything from groundworks through to final commissioning.

Find out more

Specifications correct at time of publication. Please see individual product pages for full details or contact us for a tailored recommendation.

Posted on July 28, 2026July 31, 2026 by Laura Kay — Leave a comment

Why does your Flagpole need an annual service?

The duty sits with you, and we make it easy to meet

Most flagpoles get no attention at all until something goes wrong. The pole stands outside reception, it works, nobody thinks about it, and then a halyard snaps on the morning of a visit from the mayor.

Hampshire Flag Company has been servicing flagpoles since 1981. Over more than four decades we have seen every way a pole can fail, and almost all of them give warning first. An annual service is how you catch that warning.

Here is what our service includes, what you get from it, and why it is worth having on a schedule rather than a hope.

Should you get an Annual or six-monthly service

Annual suits most sites. We would recommend six-monthly if:

Your site is coastal or exposed.
Salt-laden air accelerates corrosion considerably and exposed sites take far more wind loading. On the South Coast this covers a lot of our clients.
Your pole stands over a busy area.
A main entrance, a school playground or a public square carries more consequence if a fitting lets go.
The installation is older.
Past its middle years, a pole benefits from being looked at more often.
The flag flies continuously.
Poles that never come down accumulate wear faster.
You have several poles.
More poles means more components, and more chance one of them is the one that fails.

If you are not sure which applies to you, tell us where the pole is and what it does and we will give you an honest recommendation rather than sell you the more frequent option by default.

Port Solent, Flagpole, external halyard

Why a contract works better than booking each time

We offer six-monthly and annual maintenance schedules on three and five year terms, and we also carry out one-off visits and emergency call-outs.

The one-off route works, but the year everyone is busy is the year the service gets missed. A contract removes that risk. It also gets you:

Priority response times when something goes wrong unexpectedly
Preferential rates on parts and labour
A full wax service in every third year, keeping the pole’s gloss finish in condition rather than letting it dull
Continuity, because the team returning to your site already knows your pole’s history and what fittings it takes

For estates teams with compliance reporting to satisfy, a scheduled contract with a documented record behind it is considerably easier to administer than a series of ad hoc bookings.

Why should you get a service with Hampshire Flag Company?

What we do on every visit

Our service visits are thorough and methodical. Every one includes:

Full visual and structural inspection of the pole, base and fittings
Lowering of the pole where possible, and a full clean from base to finial
Full halyard examination and testing, with replacement where required
Finial, truck and cleat inspection, cleaning and servicing
Inspection of locks and mechanisms on internal halyard systems
A full operational test

The clean is not cosmetic. You cannot inspect a pole for cracks, corrosion or surface damage through years of accumulated grime, so we wash it down before we assess it. It is the difference between inspecting your flagpole and inspecting the dirt on it.

Old Alresford House with Flag Pole - mock-up

Wigton, 10m Flagpoles

We arrive with the parts, so you get one visit not two

We operate from a 17,000 sq ft warehouse and hold extensive stock, including flagpoles from 4m to 20m and above along with a comprehensive range of parts and accessories sourced worldwide.

In practice that means our engineers turn up prepared. Halyards, finials, cleats, locks and fittings can almost always be swapped on the same visit. You are not left with a pole that has been diagnosed but not fixed, waiting on a return trip that costs you another day of disruption and another invoice.

We can reach your pole, wherever it is

This is where most flagpole maintenance arrangements fall down. A pole with a hinged base on open ground is straightforward. A pole on a stadium roof, a church tower or a parapet is not, and a contractor with only one access method will simply decline the job. We hold three, which is why we rarely have to say no.

IPAF trained operatives.
Our team is qualified through the International Powered Access Federation to operate MEWPs including cherry pickers and scissor lifts. For most standard servicing this is the quickest and most cost-effective method, and we can arrange platform hire as part of the service so you do not have to. We completed the flagpole service and halyard replacement at Reading Minster this way, in a single visit.

Steeplejack capability.
Where ground conditions rule out a platform, our steeplejack-trained operatives ladder directly up the pole itself. We used exactly this method to service the roof-mounted flagpoles at the Rec , where bringing an access platform was not practical and most contractors would have ended the conversation there.

Rope access.
Churches are the classic problem. The pole sits close to the building, surrounded by churchyard, and driving a platform across a graveyard is neither permitted nor acceptable. Rope access lets us reach the pole with no ground vehicle movement at all.

Every access job is underpinned by a site-specific risk assessment and method statement, prepared before we arrive. That documentation goes to you along with the service record.

National Oceanography Centre Flagpoles, HFC Van

You get a written record

For compliance purposes, an inspection that is not documented is worth very little.

We can provide a written service report giving you a dated record of your pole’s condition, the components we checked, anything we replaced and anything we have flagged for future attention. That is the document that goes in your compliance file and satisfies an auditor.

It is also useful in its own right. A run of reports over several years shows you how the pole is ageing, which lets you plan and budget for replacement rather than react to a failure.

Four decades of doing this properly

Hampshire Flag Company was founded by Roy Carr in 1981 and is run today by his daughter Angela. We have been servicing flagpoles longer than most of our competitors have been trading, which means our engineers have encountered virtually every flagpole type and every servicing problem there is.

We hold ISO 9001:2015 accreditation and work to the same documented quality standards on every job, whether that is a routine annual service on a single pole or an emergency repair at a high-profile site.

Not sure when your pole was last inspected?

To arrange a service visit, discuss a planned maintenance contract or request an urgent repair, call 02392 237130 or get in touch through our website.

Book a Flagpole Service

Posted on July 28, 2026July 28, 2026 by Laura Kay — Leave a comment

How Much Does a Flagpole Cost in the UK?

The short answer

An entry-level aluminium pole for the garden starts at £66.50. A glassfibre pole, which is what we’d recommend for most people, runs from £293.95 for a 6m to £682.50 for a 12m. Installation is separate and depends entirely on your site.

Below is the detail behind those numbers, what you get for the money at each level, and what actually drives the cost of getting a pole into the ground.

Entry Level

The NOV aluminium flagpole

If you want a flagpole without a large outlay, the NOV is where to start. It’s our entry-level system, made from lightweight aluminium and supplied as a complete kit: pole, dome top or gold finial, halyard, cleat and ground socket. Everything you need to start flying flags.

Available from 3m to 6m, from £66.50.

It’s designed for lighter printed and novelty flags rather than heavy woven ones, and it’s straightforward enough for most people to install themselves. If you want a flag in the garden this weekend without overthinking it, this is the pole.

One practical detail worth knowing: our 6m NOV is built to a 6m total length, sitting 50cm in the ground and standing 5.5m above it. That keeps it under the threshold where delivery needs a dedicated vehicle, which saves you a significant charge.

NOV Aluminium Flagpole

Glass Fibre Flagpole

The one we’d recommend

Glassfibre

Glassfibre is our most popular flagpole, and it’s the range we’d point most people towards whether the pole is going outside a factory, a town hall or a family home.

Shorter poles start from £262.50, and we supply non-standard heights on request.

You’ll notice the step up at 10m. That isn’t arbitrary. Above 8m the engineering changes, with a heavier construction needed to handle the loads involved. It’s worth knowing before you settle on a height, because the jump from 8m to 10m costs considerably more than the jump from 10m to 12m.

Height	External halyard	Internal halyard

6m	£293.95	£398.95
8m	£388.50	£461.95
10m	£619.50	£692.95
12m	£682.50	£787.50

Why glassfibre is worth the step up

It’s stronger than aluminium.
Our poles are made from glassfibre matt and polyester resin with a thicker conical wall and a wider taper. Properly installed, they’ll withstand winds up to 100mph without a flag flying.

It’s built to last.
There’s no powder coating to chip and no metal to corrode. The UV-resistant marine-grade gel coat holds its gloss for years.

It’s a single piece.
No sections, no joints, no visible seams, just a clean unbroken taper from base to finial. It’s the difference between a pole that looks like equipment and one that looks like part of the building.

White is standard. However, RAL colours are available on request.

For a home installation, a 6m glassfibre at £293.95 gives you something that will still look right in fifteen years and won’t need touching in between. If you’re flying a flag you care about, in a spot you look at every day, it’s worth the difference over the entry-level pole.

Internal or external halyard?

An external halyard is the traditional arrangement, with the rope on the outside tied off at a cleat. It’s simple, cheaper, and easy for anyone to operate.

An internal halyard runs the rope inside the pole, with the cleat behind a locking door at the base. It adds between £73.45 and £105 depending on height, and it buys you two things.

The first is security. It’s an anti-vandal system, which matters on schools, public buildings and anywhere unsupervised out of hours.

The second is quiet. No rope slapping against the pole on a windy night. That’s a more common complaint than people expect, and it’s the reason a lot of domestic customers choose internal once they know it’s an option.

bath rugby club's installed cleat and halyard

Bath Rugby Club’s newly installed cleat and external halyard

Delivery

Poles up to 6m go by standard courier. Anything longer needs a dedicated vehicle, priced according to your location. A 12m pole is a genuinely awkward thing to transport, and the cost depends on where you are and what the access is like at the other end.

Installation: what actually drives the cost

This is the part that varies most, and any supplier who quotes a firm price without seeing your site is guessing.

Rather than give you an average that would mislead you, here’s what moves the number. Read down this list and you’ll have a good sense of whether your project sits at the simple end or the complicated one.

Ground conditions.
A pole going into soft ground on an open site is straightforward. The same pole going into concrete hardstanding means breaking out, disposing of the spoil and making good afterwards, which is a different job entirely.

What’s underneath.
Every installation needs a survey for buried services. Finding a cable or a drain where the foundation needs to go changes the design, and sometimes the position.

Access.
Can a vehicle reach the location? Is there room to manoeuvre a pole that may be twelve metres long? Town centre and courtyard sites often need out-of-hours working or specialist lifting equipment.

Height and foundation size.
Foundations scale with the pole. A 12m pole needs a substantially larger and deeper base than a 6m one, meaning more excavation, more concrete and more time on site.

Number of poles.
Multi-pole installations cost less per pole than a single one, because the mobilisation is the same whether we install one or five.

Site sensitivity.
Listed buildings, conservation areas, schools during term time and operational sites all bring constraints, on method or timing or both.

Making good.
Reinstating tarmac, block paving or turf to a standard you’re happy with is a real cost, and an easy one to forget when budgeting.

The practical upshot: a single 6m pole into a grass verge on an accessible site sits at the simple end. A 12m pole into hardstanding in a town centre, worked out of hours around live services, sits at the other. Tell us your location, your ground type and your access when you get in touch and we can usually give you a realistic figure quickly.

Interested in professional installation?

Find out more

Custom and bespoke projects

Not every project fits a standard pole. We regularly produce bespoke flagpoles for civic schemes, heritage sites, memorials and landmark commercial buildings: non-standard heights, specific finishes, rigged and stayed poles, and designs developed around a particular architectural context.

Custom poles start from around £500 and run into several thousand. That’s a wide range because it’s genuinely a wide category. A slightly non-standard height in a specified RAL colour sits near the bottom of it. A tall rigged pole engineered for an exposed landmark site sits a long way above.

If your project doesn’t fit a catalogue product, it’s worth a conversation early. Specifying a bespoke pole at design stage is far cheaper than adapting one later.

Old Alresford House with Flag Pole

The costs people forget

Flags.
The pole is a one-off. The flag isn’t. A flag flown continuously in an exposed position won’t last as long as one on a sheltered site, and most sites budget for replacements.

Servicing.
An annual inspection keeps the pole safe and catches wear before it becomes failure. On any public-facing site this is part of your duty of care as the operator.

Base covers and accessories.
A base cover finishes the installation neatly and protects the fixings. Halyards, finials and fittings are all replaceable over the pole’s life.

In summary

The NOV aluminium kit starts at £66.50 and is the affordable way to get a flag flying. Glassfibre runs from £293.95 for a 6m to £682.50 for a 12m, and it’s the pole we’d recommend for anyone who wants something that lasts and looks the part, at home or at work. Bespoke projects start around £600 and go up from there.

Installation is the genuine variable, but the factors above should tell you roughly where your project sits before you pick up the phone.

Prices correct as of 28.07.2026 and exclude VAT and delivery. For a firm quotation on supply and installation, get in touch and tell us your location, ground type and access, and we’ll come back to you quickly.

Posted on July 22, 2026July 22, 2026 by Laura Kay — Leave a comment

Which Ground-Mounted Flagpole Should I Buy?

12 metre flagpole supply and installation

A plain-English guide to our four main ranges

Choosing a flagpole is one of those decisions that seems simple until you start looking into it. Height, location, wind exposure, budget – there are more variables than most people expect. This guide walks you through our four main ground-mounted ranges so you can make a confident decision without having to wade through technical specifications alone.

Lets start with where and why

Before thinking about which pole to buy, it helps to consider two things: where the pole is going and what it needs to do. A flag in a sheltered back garden has very different requirements to one outside a commercial premises on an exposed high street and the right pole for each situation is quite different in terms of build quality, wind performance and price.

All of our ground-mounted flagpoles are finished in white as standard and are designed to be concreted into the ground, either via a ground socket or a hinged baseplate. With that in mind, here is a rundown of each option.

NOV Aluminium

The entry-level choice

The NOV is our most affordable ground-mounted flagpole and it does exactly what it says on the tin. It is a lightweight, single-piece aluminium pole designed for home or garden use, supplied as a complete kit with everything you need to get flying straight away – pole, halyard, cleat, ground socket and either a white dome top or gold finial.

It is well suited to smaller flags in reasonably sheltered conditions and its single-piece construction means there are no joints to worry about. One thing to be aware of is that the NOV comes with an external halyard as standard and unlike our other ranges, an internal halyard is not available on this pole. If security or anti-vandal protection is a priority, we would recommend stepping up to the Standard Aluminium or Glassfibre range, both of which offer the internal halyard option. More on choosing between internal and external halyards below.

It is also worth noting that this is very much a domestic pole if you are in an exposed location, or if the flag is going up outside a commercial premises where it will be flying day in and day out, one of the other ranges will serve you better.

Heights: 3m, 4m, 5m, 6m
Diameter: 50mm
Wall thickness: 1.5mm
Finish: Powder coated white
Pieces: Single piece
Ground fixing: Ground socket (included)
Halyard: External only

NOV Aluminium Flagpole

Standard Aluminium Flagpole

Standard Aluminium

A solid step up

Standard Aluminium Flagpole Commercial or domestic · General conditions · A step up in strength

The Standard Aluminium offers a meaningful step up in build quality from the NOV. With a larger diameter and thicker walls, it is noticeably more rigid and is designed to be used as a permanent feature rather than something you might take down seasonally. It suits both commercial and domestic settings and handles a wider range of conditions comfortably.

The 4m pole comes as a single piece; all other sizes from 5m to 8m are supplied in two pieces with a joint. This joint is robust and well-engineered, but it is worth knowing if you have a preference. Like the NOV, the Standard Aluminium comes with a ground socket as standard, though a hinged baseplate is available on request if you would prefer the option of lowering the pole for maintenance.

One practical advantage of the Standard Aluminium at the larger sizes is that the 7m and 8m poles do not require dedicated transport, whereas glassfibre poles of the same height do. If you need something taller than 6m but want to keep things simple from a delivery point of view, the Standard Aluminium is worth considering. It is also available with either an internal or external halyard and with a choice of white or gold finial.

As with all our poles, a powder coated white finish is standard, with other colours available on request.

Heights: 3m – 8m
Diameter: 60mm
Wall thickness: 3mm
Finish: Powder coated white
Pieces: 4m = single piece; 5m–8m = two piece
Ground fixing: Ground socket (standard); hinged baseplate available
Halyard: Internal or external

Glassfibre

Our recommendation for most applications

Glassfibre Flagpole Domestic or commercial · All conditions · The versatile choice

If you ask us which pole to buy, the glassfibre is the answer for the vast majority of customers. It is constructed from a mixture of glassfibre matting and polyester resin, giving it a combination of strength, flexibility and resilience that aluminium simply cannot match. The tapered conical design, wider at the base, narrowing towards the tip, distributes load exceptionally well and gives the pole its characteristic elegant appearance.

When properly installed, our glassfibre poles are rated to withstand winds of up to 100mph without a flag, which makes them genuinely suitable for exposed locations that would quickly put strain on an aluminium pole. They come as a single piece with no joint weakness, are finished in a UV-resistant marine-grade gel coat and come with a hinged baseplate as standard, meaning the pole can be lowered easily for maintenance or flag changes. Heights range from 4m up to 12m and beyond, including non-standard sizes to order.

It is also available in a range of RAL colours and metallic finishes beyond the standard white, should you need to match a specific scheme. The one practical consideration is that poles over 6m need to travel on a dedicated vehicle from our Hampshire warehouse due to their length. This does not necessarily mean a longer wait, it simply means the delivery cost will be higher than standard courier shipping and is worth factoring into your budget when comparing options at that size.

The glassfibre is also the only pole in our range available with a winch halyard system. This is worth considering for larger poles, poles carrying heavier flags, or where a hoistable wind tracker arm is fitted, the winch makes raising and lowering significantly easier in those situations and is a popular choice for commercial installations.

Heights: 4m – 12m+
Wind rating: 100mph (unflagged)
Finish: Marine-grade gel coat, white standard
Pieces: Single piece
Ground fixing: Hinged baseplate (standard)
Halyard: Internal, external or winch
Note: Poles over 6m require dedicated transport (additional cost)

Glassfibre Flagpole

Architectural Aluminium Flagpole

Architectural Aluminium

For extreme conditions

Heavy Duty Architectural Aluminium Flagpole Extreme coastal or exposed locations · Heavy duty · Price on application

The architectural aluminium range is our most heavy-duty option and is designed for a specific set of circumstances, primarily extreme coastal locations where salt air, persistent high winds and severe weather exposure are a constant. These are substantial poles, built to last in conditions that would eventually take their toll on anything less robust.

They are significantly heavier than our other ranges and this is very much a specialist product rather than an everyday flagpole. That said, if you are siting a flagpole at a clifftop location, a busy port, or anywhere else that experiences genuinely severe conditions on a regular basis, the architectural range is worth the investment. Like the glassfibre, these poles come with a hinged baseplate as standard and are available with either an internal or external halyard. Pricing is available on application, so please get in touch and we can talk through what you need.

Best for: Extreme coastal or high-exposure sites
Ground fixing: Hinged baseplate (standard)
Halyard: Internal or external
Pricing: Available on application

The four ranges at a glance

Flagpole	Best For	Size	Base	Halyard

NOV Aluminium	Domestic, sheltered locations	3m – 6m	Ground socket (standard)	External only
Standard Aluminium	Commercial or domestic, general use	3m – 8m	Ground socket (standard); hinged baseplate available	Internal or external
Glassfibre	Almost every application	4m – 12m+	Hinged baseplate (standard)	Internal, external or winch
Architectural Aluminium	Extreme coastal or high-exposure sites	Enquire for options	Hinged baseplate (standard)	Internal or external

A word on height

One question we are often asked is how tall a flagpole should be. As a general rule of thumb, a flag looks most proportionate when it is flying at roughly a third to a quarter of the pole’s height above ground. A 6m pole, for example, works well with a standard 6ft x 3ft flag. It is also worth remembering that where a ground socket is used, the bottom portion of the pole sits below ground, on a 6m Standard Aluminium pole with a ground socket, for instance, 600mm goes into the sleeve, giving you approximately 5.4m of visible pole. If you are unsure what height will work best for your site, our team is always happy to advise.

Internal or external halyard — which should I choose?

All of our poles except the NOV are available with either an internal or external halyard. Our glassfibre range also offers a third option, a winch halyard system. The halyard is simply the rope used to raise and lower your flag and the choice between internal and external comes down to two main factors: security and aesthetics. The winch option is particularly worth considering for taller poles, heavier flags, or where a hoistable wind tracker arm is fitted, as it makes raising and lowering considerably less effort. We will be covering this in detail in a dedicated blog post shortly, but in brief, if your pole is in a publicly accessible location, or if you simply want a cleaner finish with no rope on the outside of the pole, the internal halyard is the better option. For a private garden where access is not a concern, the external halyard is perfectly adequate and marginally easier to use.

Professional installation — the right foundation for your flagpole

A flagpole is only as good as its installation. Even the best pole in the world will underperform, or worse, become a safety risk, if it is not set into the ground correctly. The depth of concrete, the alignment, the choice of fixing and the condition of the ground all matter and getting them right from the start saves a great deal of trouble down the line.

We offer a professional installation service across the country, carried out by our experienced team who install flagpoles day in and day out. Whether you are having a single domestic pole put up or a row of commercial poles installed outside a business premises, we will make sure it is done properly, including all groundworks, fixing and a full check of the halyard and fittings before we leave. We will be covering the installation process in much more detail in an upcoming blog, but if you are ready to discuss having a pole installed, please do not hesitate to get in touch and we can provide a quote.

Interested in professional installation?

Find out more

In summary

Specifications correct at time of publication. Please see individual product pages for full details or contact us for a tailored recommendation.

Posted on July 22, 2026July 24, 2026 by Laura Kay — Leave a comment

What Roller Banner is best for me and my business?

When it comes to promoting your business at exhibitions, trade shows, conferences, retail environments, or reception areas, roller banners remain one of the most effective and affordable marketing tools available. Easy to transport, quick to assemble, and capable of delivering a strong visual impact, roller banners are a popular choice for businesses of all sizes.

But with several different types available, you may be asking yourself: “What are the best roller banners for me?”

In this guide, we’ll compare the roller banners available from Hampshire Flag Company and help you choose the right solution based on your budget, application, and marketing goals.

Why Choose Roller Banners?

Roller banners offer a professional display solution that can be deployed in minutes. They’re ideal for:

Trade shows and exhibitions
Corporate events
Retail promotions
Reception areas
Product launches
Presentations and conferences
Temporary displays

Whether you’re looking for an economical option for occasional use or a premium display system designed for repeated events, there’s a roller banner to suit your needs.

Economy Roller Banner

Best for Budget-Friendly Promotion

Best suited for:

Small businesses
One-off events
School exhibitions
Community events
Short-term marketing campaigns

Key benefits:

Lightweight and easy to transport
Quick assembly
Three width sizes available
Includes carry bag
Cost-effective marketing solution

If you’re attending an event occasionally and need a professional display without a significant investment, the Economy Roller Banner offers excellent value for money.

Best roller banner for: Businesses prioritising affordability and simplicity.

Economy Roller Banner

Double Sided Roller Banner

Double-Sided Roller Banner

Best for High Visibility

When visibility is critical, a Double-Sided Roller Banner is often the smartest choice.

Starting from £124.95, this banner allows your message to be seen from both directions, maximising exposure in busy environments.

Best suited for:

Exhibition halls
Shopping centres
Reception spaces
Open-plan event venues
Retail promotions

Key benefits:

Double-sided printing
Excellent visibility from multiple angles
Stable twin-foot design
Durable aluminium construction
Includes padded carry bag

Because both sides can display messaging, these banners are particularly effective in areas with high foot traffic where visitors approach from different directions.

Best roller banner for: Businesses wanting double the exposure from a single display.

Exclusive Roller Banner

Best for Frequent Exhibitors

If you regularly attend exhibitions or trade shows, the Exclusive Roller Banner is a premium display solution designed for professional, high-impact presentations.

Starting from £89.50, this banner combines durability, ease of use, and a sleek finish, making it ideal for businesses that exhibit throughout the year.

Best suited for:

Marketing teams
Exhibition professionals
Businesses with multiple campaigns
Organisations requiring high-quality display solutions

Key benefits:

Adjustable telescopic pole
Variable display height
Premium transportation bag
Robust and reliable construction
Professional appearance for repeated use

Built for regular exhibition schedules, the Exclusive Roller Banner offers a dependable and polished display option that helps your brand stand out at every event.

Best roller banner for: Companies that attend multiple events each year and need a professional, long-lasting display solution.

Exclusive Roller Banner

Height Adjustable Wide Roller Banner

Height Adjustable Wide Roller Banner

Best for Large Exhibition Displays

For organisations seeking maximum visual impact, the Height Adjustable Wide Roller Banner is the premium option.

Starting from £209.95, it provides a larger display area and widths of up to 2 metres, making it ideal for creating a standout presence at events.

Best suited for:

Large exhibition stands
Corporate conferences
Product launches
Retail displays
Branded backdrops

Key benefits:

Large-format graphics
Adjustable height
Premium build quality
Telescopic pole system
Available in three wide formats

The increased graphic area helps brands stand out in competitive exhibition environments where visibility is essential.

Best roller banner for: Businesses wanting the most impactful display possible.

Roller Banner Comparison Table

Roller Banner	Starting Price	Best For	Key Features

Economy	£40.95	Short-term events, start-ups, occasional use	Lightweight, portable, 3 width options, recyclable
Double-Sided	£124.95	High-footfall areas, exhibitions, retail spaces	Visibility from both directions, padded carry bag
Exclusive	£89.50	Businesses attending multiple events	Adjustable height, reusable graphics
Height Adjustable Wide	£209.95	Large displays, exhibition stands, conferences	Up to 2m wide, adjustable height, premium hardware

Which Roller Banner Is Best for Me?

Here’s a quick recommendation guide:

✅ Choose the Economy Roller Banner if you need an affordable, professional display for occasional use.

✅ Choose the Double-Sided Roller Banner if visibility from multiple directions is important.

✅ Choose the Exclusive Roller Banner if you exhibit regularly and need a premium, durable display solution.

✅ Choose the Height Adjustable Wide Roller Banner if you want to maximise your exhibition presence with a large-format display

Find the Perfect Roller Banner for Your Business

Choosing the right roller banner depends on your budget, how frequently you’ll use it, and the environment in which it will be displayed. Whether you’re looking for an economical solution for a one-off event or a premium exhibition display designed to make a lasting impression, Hampshire Flag Company offers a range of options to suit every requirement.

If you’re still wondering looking for answers, our team can help you select the ideal display solution based on your specific marketing and exhibition needs.

Specifications correct at time of publication. Please see individual product pages for full details or contact us for a tailored recommendation.